Then, wipe the soap away with a clean, damp cloth. Rub the soap with your fingertips a little to lather it up, then rub it on the sticker residue. If water by itself isnвЂ™t enough, try adding a drop of mild dish soap to your damp rag. Take care not to get any liquid in the vents or keyboard. Rub the sticky spot firmly with the cloth, using circular motions. Dip a soft, lint-free cloth in hot water and wring it out so itвЂ™s damp, but not dripping. This will help prevent you from getting shocked in case you accidentally spill any cleaning liquids in your laptop.

If possible, take out the battery as well. If thereвЂ™s any sticky gunk left behind, turn off your laptop completely and unplug it before you try to clean it. If itвЂ™s been there for less than a year, thereвЂ™s a good chance it will peel off cleanly, and you wonвЂ™t need to do any additional cleanup. Slowly and carefully peel off the rest of the sticker. If you canвЂ™t get a grip on the sticker with your fingernails, try very gently prying it loose with a plastic putty knife or the edge of a credit card. Start by grabbing a corner of the sticker and pulling it up.

The safest method is simply to use a soft clean cloth moistened with water.Getting a sticker off of a laptop can be tricky, especially if it leaves behind a lot of sticky residue. For example, a monitor cleaner that is designed for glass screens may not work with some non-glass LCD screens. There are monitor-cleaning kits you can buy, but they may damage your monitor if they're designed for a different type of monitor. Cleaning the monitorДirt, fingerprints, and dust can make your computer screen difficult to read however, it's easy to clean your screen when needed. Some of the dust and particles should rub off onto the paper. If you just want to give the mouse a quick cleaning, place it on a clean sheet of paper and move the mouse back and forth. If you are connecting it to a PS/2 port, you will need to connect it before turning on the computer. Allow all of the parts to dry before reassembling and reconnecting the mouse.Then clean the tracking ball and the inside of the mouse with a cotton cloth moistened with rubbing alcohol. If you have a mechanical mouse, remove the tracking ball by turning the ball-cover ring counter-clockwise.Moisten a cotton cloth with rubbing alcohol, and use it to clean the top and bottom of the mouse.If the mouse is plugged into the PS/2 port, you will need to shut down the computer before unplugging it. Unplug the mouse from the USB or PS/2 port.The basic cleaning tips below will help keep your mouse clean: This can cause erratic cursor movement or prevent the mouse from working properly. Optical mice require no internal cleaning because they do not contain any rotating parts however, they can get sticky over time as dust collects near the light emitter.Each is cleaned in basically the same way, although the mechanical mouse requires a bit more work. There are two main mouse types: optical and mechanical. To prevent this situation altogether, we recommend keeping drinks away from the computer area. Please note that the keyboard may not be fixable at this point, but the method above is probably the best option. Then turn the keyboard upside down to drain for two days before reconnecting it. If the liquid is sticky, you will need to hold the keyboard on its side under running water to rinse away the sticky liquid. Then turn the keyboard upside down and allow the liquid to drain. If you spill liquid on the keyboard, quickly shut down the computer and disconnect the keyboard. Reconnect the keyboard to the computer once it is dry.

New sticky part for bottom of laptop